Payment Options: Money Order, Cashier's Check, Personal Check,
Model: ACMS 17-25-230 IP65
Sized for 7.5 HP @ 208-230V
Your motor FLA should fall within a range of 17-25A.
Control Voltage is 208-230 VAC and is pre-wired. The control voltage is the Voltage used to magnetically engage the starter.
Enclosure size is ~10x8x6 inches.
Complete unit, ready to install.
Contactors used in our starters are sized at least one larger than motor HP rating - this means the contactor contacts are heavier for longer life.
This is for a new magnetic motor starter designed to run and protect air compressors or pumps or any machine that automatically runs when a limit or pressure switch closes.
Pre-wired for easy installation. This starter includes an On/Off selector switch and LED indicator light.
Two wires are stubbed inside the enclosure that should be wired to your remote switch. Such as, the pressure switch contacts on your air compressor. This will allow your machine to start and stop based on the pressure setting while the selector switch is ON. The selector switch is used to activate your motor starter but the machine will not run until the limits switch closes.
The LED indicator will light when ever the selector switch is On to indicate the motor starter is active and ready to connect power to your machine.
IEC type DOL motor starters are made up of primarily two parts. A contactor and overload device. Both devices have maximum ratings and the overload has maximum and minimum ratings. You should choose a motor starter that fits both criteria.
It is very common to use a 120V or 240V control Voltage even while running a machine on 480V. One or several overloads may be available for this starter. Your equipment full load Amp rating should fall within the overload settings to be properly protected.
Overload relay is Protection Class 10A and provides auto or manual reset. Additionally, the overload includes stop button, test button, normally open contact and normally closed contact.
Nice steel enclosure with hinged door and metal latch. Weatherproof to IP65 (~Nema 4).
Heavy back-plate is easily removed. Back-plate is mounted by 4 threaded studs and spaced from the back of the enclosure with rubber shock absorbing spacers.
Removable gland plate located in enclosure bottom makes hole cutting and conduit connections easy. There are no knockouts provided in IP65 enclosures.
Also includes 4 mounting brackets for each box as pictured
Wiring diagram provided on inside cover.
All components are UL certified, listed or recognized except the enclosure is international rated IP65 only.
90 day replacement Elimia warranty.
We have pre-wired DOL motor starters available from 0 HP to 100 HP.
Please call 256-528-7120 for more info or to make payment with a credit card.
We also build complete control panel assemblies to your specifications.
Guarantee: Satisfaction Guaranteed! If you are not happy with your purchase within two weeks of arrival you can return it. No restocking fee! Offer excludes shipping fees.
Please read: All items should be professionally inspected and tested prior to installation or use. We are not liable for damages, injuries or death relating to our products. We usually ship same day or at the latest 2 business days after receiving payment.
Feedback: We strive to be a 5 star supplier, if you are not satisfied with our products or service please contact Elimia directly at 256-528-7120. Once you are satisfied with your purchase please leave us feedback to let others know we are a trusted source.
If you are not satisfied please call us for resolution.
Powered by eCRATER. List your items fast and easy and manage your active items..